MA License Prep

Material covered in this course:

• Proper crane setup
• Jobsite safety
• Crane component recognition
• Mathematical load weight and load bearing calculations
• Crane inspection parameters
• Wire rope guidelines and inspection
• Standard hand signals
• Safety standards wisdom
• Load chart specifics
• Safety standards wisdom

Material covered in this course:

• Proper crane setup
• Jobsite safety
• Crane component recognition
• Mathematical load weight and load bearing calculations
• Crane inspection parameters
• Wire rope guidelines and inspection
• Standard hand signals
• Safety standards wisdom
• Load chart specifics
• Safety standards wisdom

If you need to apply to take the Hoisting Engineer License test, please read our step by step instructions here. 

Crawler and rubber-tired excavators, backhoes and loaders. 

This course covers machine components, hydraulic theory, mathematical calculations, inspection parameters, standard hand signals and capacities. 

Material covered in this course: 
•Proper equipment setup 
•Jobsite safety 
•Component recognition 
•Introduction to Hydraulic Theory 
•Inspection Parameters 
•Standard Hand Signals 
•Safety standards wisdom 
•Introduction to Excavators 
•Excavator Safety

This course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It is specifically designed to prepare the attendee to pass the Massachusetts 3A Hoisting Engineer License test. 

If you need to apply to take the Hoisting Engineer License test, please read our step by step instructions here. 

This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16 and OSH act of 1970 General Duty Clause 5(a)(1). 

Material covered in this course: 
•Operation 
•Inspection 
•Rigging 
•Owners' Responsibility 
•Operators' Responsibility

This course covers forklifts and cranes. 

It will prepare the attendee for his/her 1C hydraulics license test in Massachusetts.  If you need to apply to take the Hoisting Engineer License test, please read our step by step instructions: https://www.cranes101.com/cranes/massachusetts-hoisting-license-steps/

This class meets or exceeds the requirements of ANSI B30.22, B56.1, and OSHA 1910.178. 

Material covered in this course: 
•Crane Components 
•Introduction to Hydraulic Theory 
•Inspection Parameters 
•Standard Hand Signals 
•Fuel/Electric Storage 
•ANSI and OSHA standards 
•Safe practices 
•Proper care and maintenance 
•Forklift Operation

This course covers forklifts. 
It will prepare the attendee for his/her 1D hoisting license test in Massachusetts. If you need to apply to take the Hoisting Engineer License test, please read our step by step instructions here. 

This class meets or exceeds the requirements of ANSI B56.1, and OSHA 1910.178. 

Material covered in this course: 

•Fuel/Electric Storage 
•ANSI and OSHA standards 
•Safe practices 
•Proper care and maintenance 
•Physics 101