Course image 1C Telescoping Booms w/o Cables, Forklifts Cont Ed for MA HE License
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 1C Hoisting License. 

If you're seeing this listing and wish to enroll, you can do so here.

Equipment hydraulic telescoping booms without wire ropes and forklifts 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Inspection Parameters 
Standard Hand Signals 
Load Charts 
Forklift operations 


This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.


Course image 2A Excavators Continuing Ed for MA HE License
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 2A Hoisting License. 

If you're seeing this listing and wish to enroll, you can  do so here.

Crawler and rubber-tired excavators, backhoes and loaders 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Introduction to Hydraulic Theory 
Inspection Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.


Course image 1A Derricks/Lattice Cranes Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 1A Hoisting License. Operators may operate all friction clutch machines and all derricks (including guy derricks, stiff legs, Chicago booms, gin poles); Lattice boom machinery and hoisting machinery listed under 1B, 1C, and 1D.  This course qualifies for CE credits in Mass.

If you're seeing this listing and wish to enroll, you can  do so here.

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. 

Material covered in this course: 
Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Load Moment Indicator (LMI) 
Inspection Parameters 
Wire Rope 
Standard Hand Signals 
Load Charts 
Assembly/Disassembly 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.

Course image 1B Telescoping Boom w/Cables Cranes Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 1B Hoisting License. 

Equipment with telescoping booms with or without wire ropes. 
This course qualifies for CE credits in MA

If you're seeing this listing and wish to enroll, you can do so here.

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 

Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Load Moment Indicator (LMI) 
Inspection Parameters 
Wire Rope 
Standard Hand Signals 
Load Charts 


This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.


Course image 1D Forklift Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 1D Hoisting License. 

If you're seeing this listing and wish to enroll, you can do so here.

General industrial warehouse Fork Lift equipment primarily used in indoor facilities 
This course qualifies for CE credits in MA. 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 


Material covered in this course:
 
Massachusetts Regulations 
Fork truck maneuvering 
The mechanics of the Fork Truck 
Daily inspections 
Fuel/Electric storage 
ANSI and OSHA standards 
Safe practices 
Proper care and maintenance 
Physics 101 

This course, combined with the Mass Hoisting and Industry Standards Training, is 2 hours long.


Course image 2B Front End Loader/Backhoes Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 2B Hoisting License. 

If you're seeing this listing and wish to enroll, you can do so here.

Backhoes and front-end loaders 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 


Material covered in this course:
 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Introduction to Hydraulic Theory 
Inspection Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.


Course image 2C Front End Loaders/Uniloaders Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 2C Hoisting License. 

If you're seeing this listing and wish to enroll, you can do so here.

Front-end loaders 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 
 

Material covered in this course:
 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Introduction to Hydraulic Theory 
Inspection Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.

Course image 2D Compact Hoisting Machinery Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 2D Hoisting License.

If you're seeing this listing and wish to enroll, you can  do so here.

Compact hoisting machinery with a gross vehicle 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 


This course qualifies for CE credits in MA 

Material covered in this course:
 
Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Load Moment Indicator (LMI) 
Inspection Parameters 
Wire Rope 
Standard Hand Signals 
Load Charts 
Assembly/Disassembly 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.


Course image 3A Electric & Air Powered Hoisting Equipment Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 3A Hoisting License. 

If you're seeing this listing and wish to enroll, you can do so here.

Electric and air powered hoisting equipment (overhead Cranes) 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 


Material covered in this course:
 
Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Load Moment Indicator (LMI) 
Inspection Parameters 
Wire Rope 
Standard Hand Signals 
Load Charts 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.


Course image 4B Drill Rigs Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4B Hoisting License. 

If you're seeing this listing and wish to enroll, you can  do so here.

Drill Rigs 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 


Material covered in this course:
 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Introduction to Hydraulic Theory 
Inspection Parameters 
Trench Safety 
Dig Safe Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 2 hours long. 


Course image 4C Pipeline Side Booms Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4C Hoisting License. 

If you're seeing this listing and wish to enroll, you can do so here.

Pipeline Side booms 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 


Material covered in this course:
 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Inspection Parameters 
Trench Safety 
Dig Safe Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 2 hours long. 


Course image 4D Concrete Pumps Continuing Ed for MA Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4D Hoisting License.

If you're seeing this listing and wish to enroll, you can do so here.

Concrete Pumps

This course qualifies for CE credits in MA

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. You will not receive any CE credit without this number. 

Material covered in this course:

Massachusetts Regulations

Proper equipment setup

Jobsite safety

Component recognition

Inspection Parameters

Trench Safety

Dig Safe Parameters

This course is 2 hours long. 

Course image 4E Catch Basin Cleaners Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4E Hoisting License.

If you're seeing this listing and wish to enroll, you can do so here.

Catch Basin Cleaners 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 


Material covered in this course:
 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Inspection Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 2 hours long. 


Course image 4F Sign Hangers Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4F Hoisting License. 

If you're seeing this listing and wish to enroll, you can do so here.

Sign-Hangers 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 


Material covered in this course:
 
Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Load Moment Indicator (LMI) 
Inspection Parameters 
Wire Rope 
Standard Hand Signals 
Load Charts 

This course, combined with the Mass Hoisting and Regulatory component, is 2 hours long. 


Course image 4G Specialty Lawn Mowers Continuing Ed for MA HE Lic
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4G Hoisting License. 

If you're seeing this listing and wish to enroll, you can  do so here.

Specialty Lawn Mowers

This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 

Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Inspection Parameters 
Trench Safety 

This course, combined with the Mass Hoisting and Regulatory component, is 2 hours long. 


Course image Mass Hoisting Industry and Regulatory Standard Training / Continuing Education
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

PART 1  - Continuing Ed


This 2-hour course includes information that the Commonwealth of Massachusetts requires you to know.  Completion of this course satisfies PART of the requirement to maintain your license in the Commonwealth of Massachusetts under categories 1 (except D), 2, and 3.


This course will be packaged along with the course for your license. Please take both halves of the course to complete your requirements.  If you do NOT see a course with a license category here, you will need to purchase it from our Customer Portal.  

Course image Mass Hoisting Industry and Regulatory Standard Training - 1 Hour Continuing Education
MA Certified Continuing Education
Certification name: Continuing Education Certificate
Cert duration (years): 2
Standards: 520 CMR 6.00
Card: No

PART 1 - MA Hoisting Engineer Continuing Education


This 1-hour course includes information that the Commonwealth of Massachusetts requires you to know.  Completion of this course satisfies HALF of the requirement to maintain your license in the Commonwealth of Massachusetts under 1D and Category 4.

This course will be packaged along with the course for your license. Please take both halves of the course to complete your requirements.  If you do not see a second course labeled with 1D,  4B, 4C, 4D, 4E, 4F, or 4G, you must go purchase the course package from the Customer Portal.