MA Certified Continuing Education

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 1C Hoisting License. 

Equipment hydraulic telescoping booms without wire ropes and forklifts 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Inspection Parameters 
Standard Hand Signals 
Load Charts 
Forklift operations 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 2A Hoisting License. 

Crawler and rubber-tired excavators, backhoes and loaders 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Introduction to Hydraulic Theory 
Inspection Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 1B Hoisting License. 

Equipment with telescoping booms with or without wire ropes. 
This course qualifies for CE credits in MA

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 

Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Load Moment Indicator (LMI) 
Inspection Parameters 
Wire Rope 
Standard Hand Signals 
Load Charts 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 1D Hoisting License. 

General industrial warehouse Fork Lift equipment primarily used in indoor facilities 
This course qualifies for CE credits in MA. 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Fork truck maneuvering 
The mechanics of the Fork Truck 
Daily inspections 
Fuel/Electric storage 
ANSI and OSHA standards 
Safe practices 
Proper care and maintenance 
Physics 101 

This course, combined with the Mass Hoisting and Industry Standards Training, is 2 hours long.

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 2B Hoisting License. 

Backhoes and front-end loaders 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Introduction to Hydraulic Theory 
Inspection Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 2C Hoisting License. 

Front-end loaders 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number.  

Material covered in this course: 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Introduction to Hydraulic Theory 
Inspection Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 2D Hoisting License.

Compact hoisting machinery with a gross vehicle 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

This course qualifies for CE credits in MA 

Material covered in this course: 
Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Load Moment Indicator (LMI) 
Inspection Parameters 
Wire Rope 
Standard Hand Signals 
Load Charts 
Assembly/Disassembly 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 3A Hoisting License. 

Electric and air powered hoisting equipment (overhead Cranes) 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Load Moment Indicator (LMI) 
Inspection Parameters 
Wire Rope 
Standard Hand Signals 
Load Charts 

This course, combined with the Mass Hoisting and Regulatory component, is 4 hours long.

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4B Hoisting License. 

Drill Rigs 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Introduction to Hydraulic Theory 
Inspection Parameters 
Trench Safety 
Dig Safe Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 2 hours long. 

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4C Hoisting License. 

Pipeline Side booms 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Inspection Parameters 
Trench Safety 
Dig Safe Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 2 hours long. 

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4D Hoisting License.

Concrete Pumps

This course qualifies for CE credits in MA

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. You will not receive any CE credit without this number. 

Material covered in this course:

Massachusetts Regulations

Proper equipment setup

Jobsite safety

Component recognition

Inspection Parameters

Trench Safety

Dig Safe Parameters

This course is 2 hours long. 

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4E Hoisting License.

Catch Basin Cleaners 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Inspection Parameters 

This course, combined with the Mass Hoisting and Regulatory component, is 2 hours long. 

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4F Hoisting License. 

Sign-Hangers 
This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 
Massachusetts Regulations 
Crane Components 
Mathematical Calculations 
Load Moment Indicator (LMI) 
Inspection Parameters 
Wire Rope 
Standard Hand Signals 
Load Charts 

This course, combined with the Mass Hoisting and Regulatory component, is 2 hours long. 

This is a continuing education course that has been approved by the Mass Department of Public Safety for renewal of a 4G Hoisting License. 

Specialty Lawn Mowers

This course qualifies for CE credits in MA 

Students MUST possess a valid MA Hoisting Engineer's License to receive Continuing Education credits. Upon registration, students will be asked to enter their Hoisting Engineer's license (HE-License) number. 
You will not receive any CE credit without this number. 

Material covered in this course: 

Massachusetts Regulations 
Proper equipment setup 
Jobsite safety 
Component recognition 
Inspection Parameters 
Trench Safety 

This course, combined with the Mass Hoisting and Regulatory component, is 2 hours long. 

PART 1  - Continuing Ed

This 2-hour course includes information that the Commonwealth of Massachusetts requires you to know.  Completion of this course satisfies PART of the requirement to maintain your license in the Commonwealth of Massachusetts under categories 1 (except D), 2, and 3.

This course will be packaged along with the course for your license. Please take both halves of the course to complete your requirements.  If you do NOT see a course with a license category here, you will need to purchase it from our Customer Portal.  

PART 1 - MA Hoisting Engineer Continuing Education

This 1-hour course includes information that the Commonwealth of Massachusetts requires you to know.  Completion of this course satisfies HALF of the requirement to maintain your license in the Commonwealth of Massachusetts under 1D and Category 4.

This course will be packaged along with the course for your license. Please take both halves of the course to complete your requirements.  If you do not see a second course labeled with 1D,  4B, 4C, 4D, 4E, 4F, or 4G, you must go purchase the course package from the Customer Portal.